MWM Premium Antifreeze -20

High Performance Coolant

Suitable for all MWM diesel and gas engines

MWM Premium Antifreeze –20

High-performance coolant for MWM diesel and gas engines.

  • Suitable for all MWM diesel and gas engines
  • Suitable for all plant configurations (exhaust heat exchanger in the engine and heating circuit)
  • Contains silicate – effective corrosion protection due to hybrid technology
  • Amine, nitrite and phosphate-free
  • Small deposits on thermally high-loaded components such as the cylinder liner 
  • Extended exhaust heat exchanger service lives due to low total hardness
  • Simple handling as a ready-mix
  • optimized glycol content for safe frost and corrosion protection with a maximum heat transmission capacity

Permanently safe operation of gas engines

With increasing engine power and higher levels of efficiency, the thermal loading of engine components adjoining the combustion chamber increases. The main task of the coolant is to discharge the combustion heat from these components (component cooling) and provide it to the customer as useful heat. The coolant is therefore not only responsible for a continuously safe engine operation, but also for efficient use of the plant.

MWM - many years of experience with gas engines

Like lube oils, coolants are tested in intensive field tests and approved for use. Based on the long-standing experience of our development engineers, as well as extensive assessment of field experiences of the MWM service organization, the inhibitor technology for MWM Premium Antifreeze –20 has been selected together with a strategic partner.

High profitability

The focus when selecting the MWM Premium Antifreeze –20 inhibitor technology was on a low formation of deposits on thermally high-loaded components, since the heat transfer is inhibited by the formation of isolating layers in these areas (primarily cylinder liner and cylinder head), which may have adverse effects on oil consumption and valve wear.

MWM Premium Antifreeze –20 is characterized by excellent heat transfer, safe frost and corrosion protection and simple handling. The availability and economic efficiency of the plant is increased due to the use of MWM Premium Antifreeze –20.

Optimum coolant composition: protection against corrosion and consumption

The heat conductivity of coolants drops with an increasing glycol content. With a glycol content of 35 Vol. %, MWM Premium Antifreeze –20 is the optimum product for safe frost protection up to –23 °C and has very good heat transmission properties at the same time. Non-organic and organic inhibitors are used in MWM Premium Antifreeze –20 as means of corrosion protection. These form a thin, heat-permeable protective layer on the wetted components.

In order to ensure reliable protection of the engine, the correct inhibitor concentration of the coolant is particularly important. Overconcentration poses the risk of damage to wetted components, and too low concentration of the inhibitor cannot guarantee a sufficient corrosion and cavitation protection. If cooler frost protection concentrates are used for preparing the coolant on site, the correct composition of the mixing water must also be considered, otherwise there may be deposits in the area of the exhaust heat exchanger.

As a read-mix, MWM Premium Antifreeze –20 always has the correct inhibitor and glycol concentration – an incorrect dosage is thus prevented. MWM Premium Antifreeze –20 is suitable for all plant configurations and can be comfortably filled during maintenance.

Spare parts

Click here to order spare parts for MWM gas engines and gensets.

CHP ROI Calculator

Calculate the profitability of MWM cogeneration power plants and gas engines.

Gas engines & Products

Gas engine TCG 3016

400 - 1,000 kWel

New development – greatly reduced operating and installation costs and fully digitized power plant control.

Cogeneration Power Plant Solutions

Eco-friendly MWM cogeneration power plants with combined heat and power enable decentralized, economical and energy-efficient power production.

Gas engine TCG 2020

1,000 - 2,000 kWel

For the highest ratings in ecology and economy. Best electrical and thermal efficiency in its class. All gas types: natural gas, biogas, mine gas, landfill gas, sewage gas.

Gas engine TCG 2032

3,000 - 4,500 kWel

High availability, low installation costs. All gas types: natural gas, biogas, landfill gas, sewage gas, mine gas, coke oven gas. Mainly used in large IPP projects with up to 100 MWel.

Container Cogeneration Plant

Container Cogeneration Plant, the mobile power plant of MWM. Complete turnkey systems for special applications. Quality "made in Germany". Optimized for reliable, smooth operation and fast service.

Contact Sales

MWM Sales
Caterpillar Energy Solutions GmbH
Carl-Benz-Strasse 1
68167 Mannheim

Please fill out our contact form and we will call you back!